Logical Solutions SCS-R Manuel d'utilisateur télécharger pdf (Page 35)

tel (203) 647-8700 Page 35 Product Manual - MAN-000001C

Front Panel Network SetupSECURE CO NSO LE S ERVERS

4.4.1.2 Program Network

When you select the Program Network Settings mode, you step through the

parameter entry for Network IP Address, Net Mask and Gateway, and Exit to the pre-

vious menu. The Up and Down arrows are used to scroll through the available options.

Network IP Address

Figure 4.2 SCS Front Panel Display, for Network Programming mode

Press the ENTER button to continue.

Figure 4.3 SCS Front Panel Display, showing the current IP Address

The current IP Address will be displayed, shown with leading zeroes. The factory

default is 10.9.8.7. If you do nothing, the display will revert to the previous display after

30 seconds, and no changes will be made.

Let’s change the IP Address. Press the ENTER button to continue.

Figure 4.4 SCS Front Panel Display, showing Edit IP Address

A cursor appears under the first character of the existing address. Press the Left or

Right arrow button to move the cursor to the first digit to be changed. To change a

digit, use the Up or Down arrows to change the number.

Note

Ignore any leading 0’s in the display entry. The SCS will adjust for

them and will not store the leading zeroes when saving the data.

Press Enter to

Program Network Settings

IP Address

010.009.008.007

Edit IP Address

010.009.008.007

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 89 90

Pas de commentaire

Logical Solutions SCS-R Manuel d'utilisateur Page 35